Commercial Window Treatments

New Whiteland, IN Commercial Window Treatments

Call (317) 854-7158Get Free Quote
Quick Answer

Here's what to know before specifying this for your house. Room conditions, mount type and lift system all change the outcome, and the answers below explain how each one moves the decision.

  • Service: Commercial Window Treatments for New Whiteland homeowners
  • Service area: New Whiteland, IN and surrounding areas
    • Getting somebody out to measure is the easy part and happens on a normal schedule. After that the fabricator needs roughly two to five weeks. We give you a specific window when we write the order.
  • Insured and bonded
  • Serving New Whiteland, IN since 2008
Commercial Window Treatments Services

Expert Commercial Window Treatments for New Whiteland Homes

The fabric is rarely what makes a commercial number hurt. Motors and the power to feed them move a budget, and so does the lift equipment needed to reach glass above an atrium. When something has to come out of the New Whiteland scope, New Whiteland Window Treatments would rather cut the motorization on low glass than downgrade the fabric on the hard elevation.

When to Call

Signs You Need Commercial Window Treatments

If you notice any of these in your New Whiteland home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

Half a floor got new shades and the rest waited

Chain operated shades run across a twenty foot wall

Turnover units keep needing whole new blinds

Staff cover monitors with paper against afternoon glare

Batteries in the boardroom died again last quarter

Sun lands on the reception desk for two hours daily

Nobody can identify the fabric to reorder one shade

A tenant fit-out has openings with nothing scheduled

One elevation is three years newer than the others

Chains take real effort to operate on tall openings

Our Process

How New Whiteland Window Treatments Handles Commercial Window Treatments

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Access and staging coordinated daily

2

Attic stock and documents handed over

3

Openness factor set per exposure

4

Removal and disposal scheduled

5

Fabric names and roll directions recorded

Real Project Photos

Commercial Window Treatments in New Whiteland

Photographs from real commercial window treatments jobs completed by our crew in New Whiteland and surrounding areas.

Custom shades measured and installed in New Whiteland
Scope of Work

What Commercial Window Treatments Includes

Every New Whiteland job is documented item by item. Here is what the crew covers.

Site walk with the facilities contact to log every opening, elevation and existing condition

Openings measured individually rather than typed off a floor plan, because as-built rarely matches drawn

Occupancy and fire requirements confirmed with the authority having jurisdiction before fabric selection

NFPA 701 flame propagation test documentation obtained and included in the submittal package

Fabric, hardware and finish samples submitted for approval before anything is released to fabrication

Control type and mounting height set against ADA section 308 reach ranges where the space requires it

Operating force checked against the ADA section 309.4 limit of five pounds on operable parts

Motorization specified wherever a manual control can't meet reach or force requirements

Openness factor selected per elevation so screens and monitors stay usable through the day

Dual roller assemblies drawn where one opening needs both glare control and darkness

Coupled tubes specified on wide spans so a run of openings reads as one continuous line

Written lead times issued with the order and updated in writing whenever the factory moves a date

Install phased around operating hours, floor by floor or wing by wing, with access arranged in advance

Elevator, loading and badge access coordinated so crews aren't working out of a corridor

Debris and packaging removed daily rather than staged in occupied space

Attic stock quantities agreed up front so a damaged unit can be swapped without a new order

Punch list walked with the owner's representative and closed out in writing

Operation, cleaning and parts information handed to facilities in a document they can actually find later

Pricing

What Commercial Window Treatments Cost in New Whiteland

Commercial pricing works per opening the same way residential does. The national ranges to anchor against are roughly $250 to $2,600 per window for custom-fabricated shades and roughly $300 to $1,500 per window installed for motorized product. Those are national category ranges, not a bid for a building in New Whiteland, and nobody should treat them as one. Quantity helps on a large floor plate, and fire-rated fabric, submittal work and phased after-hours access all push the other way. A property in Johnson County with a hundred identical openings prices very differently from one with forty odd shapes. New Whiteland Window Treatments bids from a measured opening schedule, with the fire documentation and the control specification written into it.

By Product

How Commercial Window Treatments Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

NFPA 701 tested screen fabric: Solar screen woven and tested to the NFPA 701 flame propagation standard, with the test documentation available for the submittal. This is the starting point for any occupancy where the code official asks for it in writing.

Dual roller assembly: Two shades on one bracket set, typically a solar screen in front and a room darkening fabric behind. It lets a conference room work as a daylit space in the morning and a presentation room in the afternoon.

Continuous cord loop with tensioner: The manual control that handles weight best on large commercial units. The tensioner is fastened per the manufacturer instructions, and in child-occupied spaces we look at cordless or motorized instead.

Cordless lift: No accessible operating cord at all, which is what you want in classrooms, childcare rooms and paediatric spaces. It limits practical size, so past a point the answer becomes a motor rather than a bigger spring.

Low-voltage motorization: Hardwired motors with a wall keypad, which is the durable answer in a building where nobody wants to change batteries on a schedule. The power work is done by a licensed electrical contractor as part of the trade coordination.

We offer repairs only on treatments The Window Valet installed or has serviced before. If we haven't worked on your treatments, we'll book a consultation for new ones. Battery motorization for retrofit: Where opening a finished wall isn't on the table, battery or rechargeable motors get automation into an existing space. Budget for the replacement interval, because a floor of battery shades is a recurring facilities task.

ADA-height wall keypad: A fixed control placed inside the reach ranges in ADA section 308 and operable well under the five pound force limit in 309.4. It's often the cleanest way to satisfy accessibility on an opening a chain never could.

Light-blocking pocket and side channels: A pocket at the header plus channels at the jambs, so a training room or a sleep room goes properly dark instead of dim. It's the difference between a blackout fabric and a blackout result.

Wipeable vinyl-faced fabric: A non-porous face that takes repeated cleaning without breaking down, specified in clinical areas and food service where the surface has to be wiped down as a matter of routine.

PVC vertical blinds: Still the right answer for multifamily turns and back-of-house openings. Individual vanes replace cheaply when one gets damaged, which matters far more than aesthetics when a unit turns every year.

Common Questions

Commercial Window Treatments FAQ

Questions we hear most often from New Whiteland homeowners considering commercial window treatments.

We'll quote your project after measuring the openings and reviewing the products you've chosen. Your written quote will show the treatments and the agreed installation work. Your in home design consultation is free. We'll look at your openings and talk through the rooms you're planning to cover.
Most projects wrap in a matter of days once materials are on hand. Weather and scope can move the schedule, and you get a realistic timeline in writing before we begin.
We carry insurance and bonding, and the documentation comes with every written estimate. On the license question the honest answer is that Indiana issues no statewide license for window treatment work and Indianapolis has no category that covers it, so any company telling you it is state licensed for this trade is describing something else. Where a job involves hardwired motorization, that electrical work is done by a licensed electrical contractor.
Yes. Crews work New Whiteland and the surrounding communities, and the estimate visit is free.
It depends on the occupancy and on what your code official requires, which is why we ask before we specify. NFPA 701 covers flame propagation testing for textiles hung vertically, and assembly, healthcare, education and hospitality spaces are where it most often comes up. The part that trips projects isn't the fabric, it's the paperwork. Test documentation has to be in the submittal package, and a fabric someone believes is compliant without a document behind it will get rejected at review.
Two sections do most of the work. Section 308 sets the reach ranges for operable parts, which decides how high a chain, wand or keypad can sit and how far it can be from where somebody can get to. Section 309.4 caps the force to operate at five pounds and requires one-hand operation without tight grasping or twisting. A heavy chain on a large shade can fail that force test. When it does, the answer is usually a motor and a keypad rather than an argument.
That's the normal way we do it. Work gets phased by floor, wing or suite, with a schedule agreed in advance so nobody's meeting is happening under a ladder. Some scopes are better after hours and some are fine mid-morning in an empty conference room. We sort out badge access, elevator use and where the boxes stage before the first crew day, because the thing that actually derails a commercial install is access, not product.
We offer repairs only on treatments The Window Valet installed or has serviced before. If we haven't worked on your treatments, we'll book a consultation for new ones. Offices, healthcare, education, hospitality and multifamily, and each one changes the specification. Healthcare wants wipeable surfaces and infection control input. Education wants cordless lifts and hardware that survives teenagers. Hospitality wants blackout that genuinely works, because a guest who can't sleep leaves a review about it. Multifamily wants a product that's cheap to repair one vane at a time. Offices want glare control on the monitors. The building type usually tells us the fabric before the design conversation starts.
Custom fabrication generally runs two to five weeks, and a large commercial order with submittal review and approval on top of that runs longer. The sequence matters: samples out, approvals back, then release to fabrication, and the clock on the factory doesn't start until approval lands. We put every date in writing and we update it in writing when the factory changes it. Building a schedule around a verbal lead time is how a project ends up with bare openings at occupancy.
Three percent is the common answer on the elevations that get direct sun, with five percent where the exposure is gentler and view matters more. The test isn't how the fabric looks in a sample book, it's whether somebody can read a monitor at the worst hour of the day. We'll hang a sample on the actual elevation and let people sit under it. Getting this wrong across a floor of a New Whiteland building is expensive, and it's entirely avoidable.
Yes, and we treat both as part of the scope rather than a favor. Submittals include fabric and hardware samples, cut sheets, the fire test documentation where the occupancy requires it, and a shade schedule tied to the opening numbers. At closeout, facilities gets operation and cleaning information, the fabric and hardware identification for reorders, and the attic stock count. That last one saves a lot of trouble two years later when somebody needs one shade replaced and nobody remembers the fabric.
Motorize where a manual control fails on reach, force or height, where the openings are high or behind furniture, and where the shades should move on a schedule rather than on somebody remembering. Leave manual where the openings are ordinary and reachable, because motors add cost and a maintenance obligation. The mistake we see most is motorizing a whole floor to solve a problem that exists on one elevation. Specify per opening, not per building.
We offer repairs only on treatments The Window Valet installed or has serviced before. If we haven't worked on your treatments, we'll book a consultation for new ones. They're the right answer in a retrofit where nobody's opening a finished wall, and they come with an obligation you should accept before you buy. Hunter Douglas states PowerView battery life is about one year, and commercial use with daily scheduled cycles doesn't improve on that. Multiply by the opening count and you have a recurring facilities task. Where power can be brought to the header, hardwired low-voltage motors are the better long-term call, with a licensed electrical contractor doing that part.
They get treated as one line, not as separate shades that happen to be near each other. Tubes are coupled where the spans call for it so the shades track together, and hembars are aligned so a partly lowered run doesn't look ragged from the street. On a motorized job the group is addressed to one control so nobody has to press five buttons. This is the detail that separates a commercial install that looks intentional from one that looks assembled.
A blackout fabric alone gets you dim, not dark, because light comes around the edges of any inside mount. For a room where a projected image has to hold contrast, we specify blackout fabric with a light-blocking pocket at the header and side channels at the jambs. If the room also gets used for daylit work, we run a dual roller so the screen fabric handles the everyday condition and the blackout comes down only when it's needed.
Often, and it's worth a conversation before you assume it. Bring us a shade or the original paperwork and we'll identify the fabric and hardware if it's still made. Two honest cautions: fabrics get discontinued, and fabric still in production runs in dye lots, so a new run can sit slightly off older shades on the same floor. Where the match won't hold, replacing a whole elevation at once usually looks better than patching one opening.
We are, and we insist on field measuring rather than working from the drawings. As-built openings differ from the plan more often than not, and a shade schedule built from a drawing produces a stack of product that doesn't fit and can't be returned. That means we need the openings framed and reasonably finished before we measure, which affects the schedule. We'd rather have that conversation with the general contractor early than explain a reorder later.
This is why attic stock is agreed at the start. A few spare units in the common sizes mean facilities swaps the damaged one the same week instead of waiting on a fabrication run for a single shade. Where a spare isn't available, we reorder from the shade schedule using the opening number, the fabric and the finished sizes we recorded. That record is the reason we hand over documentation rather than assuming somebody kept the packing list.
Areas We Serve

Commercial Window Treatments Across New Whiteland

We measure and install in every one of these New Whiteland neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in New Whiteland

New Whiteland Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in New Whiteland

Wrong for a great room. We'll say so.

Learn more →

Wood Blinds in New Whiteland

Quoted per opening so the outlier is obvious.

Learn more →

Vertical Blinds in New Whiteland

A horizontal blind that wide is the wrong product.

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in New Whiteland

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
New Whiteland, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 854-7158
Service area

Serving New Whiteland and the surrounding area

Call NowGet Quote